Coated Abrasives
General Information
PFERD offers a comprehensive range of short
Application examples
belts.
■■Fine-grinding of larger surfaces in multiple
steps.
They differ in:
■■Surface texturing.
■■Dimensions,
■■Creation of uniform visual effects on large
■■grit sizes,
surfaces
■■flexibility and
■■abrasives used.
Recommendations for use
The PFERD product range is aligned to the
For the application recommendations for
standard belt grinders available in the market.
different operating conditions and the alloca-
tion to the power sources, please refer to the
PFERD short belts are designated as “Abrasive
following pages.
belts” according to ISO 2976.
The use of the appropriate grinding oil on the
different materials can substantially increase
Advantages
tool life and the abrasive performance of tools
made from coated abrasives. For detailed
■■High abrasive performance.
information and order data regarding grinding
■■High tensile strength with appropriate flex-
oils, please refer to page 110.
ibility.
■■Excellent grit adhesion.
■■Long tool life.
Safety note
VDS safety guidelines (Verband deutscher
Schleifmittelwerke: Association of German
Abrasive Manufacturers). Observe the “Safety
guidelines for the correct use of abrasive
belts”. You can find this information on our
homepage, www.pferd.com.
Safety recommendations
= Wear eye protection!
= Wear gloves!
= Wear hearing protection!
= Wear a respirator!
= Read the instructions!
= Not permitted for wet grinding!
Cutting speed
40.000
Short and long belts
30.000
For the recommended cutting speeds [m/s],
please refer to the application recommenda-
20.000
tions for the use of short and long belts.
15.000
In the adjacent diagram, the cutting speeds are
represented through diagonal lines.
10.000
The vertical line representing the tool diameter
7.000
meets the given cutting speed (diagonals).
From its point of intersection proceed horizon-
5.000
tally to the left margin where you will find the
4.000
corresponding recommended rotational speed
[RPM] of the drive roll.
3.000
2.000
1.000
500
300
20
30
40
50
80
100
120
160
200
250
300
Diameter of the drive roll [mm]
30
I
204
Coated Abrasives
General Information
Application recommendations for use of long/short abrasive belts
Material groups
Application
Surface
Grit size
Recom.
Recom.
roughness
abrasive
cutting speed
grit
[m/s]
Construction steels,
coarse grinding
coarse
coarse
Non-hardened,
carbon steels,
non-heat treated
tool steels,
Aluminium
steels up to
fine grinding
25-35
non-alloyed steels,
oxide A fleece
1200 N/mm²
case-hardened steels,
(< 38 HRC)
very fine
cast steels
fine
fine
Steel,
grinding
cast steel
coarse grinding
coarse
coarse
Hardened,
Aluminium
Tool steels,
heat-treated steels
oxide A
tempered steels,
exceeding
fine grinding
Z-Zirconia
20-30
alloyed steels,
1200 N/mm²
alumina
cast steels
(> 38 HRC)
very fine
fleece
fine
fine
grinding
coarse grinding
coarse
coarse
Rust and
CO-COOL
Stainless
Austenitic and
acid-resistant
fine grinding
A-COOL
15-25
steel (INOX)
ferritic stainless steels
steels
fleece
very fine
fine
fine
grinding
coarse grinding
coarse
coarse
Alu-alloys,
Soft non-ferrous
brass,
Aluminium
fine grinding
30-40
metals
copper,
oxide A fleece
zinc
very fine
fine
fine
grinding
coarse grinding
coarse
coarse
Bronze,
titanium,
Non-ferrous
Hard non-ferrous
titanium alloys,
fine grinding
20-30
metals
metals
aluminium alloys
(high Si content)
very fine
CO-COOL
fine
fine
grinding
Aluminium
oxide A
coarse grinding
coarse
coarse
fleece
Nickel based alloys,
High-temperature
cobalt based alloys (aircraft
fine grinding
5-15
resistant materials
engine and turbine
construction)
very fine
fine
fine
grinding
coarse grinding
coarse
coarse
Cast iron with flake graphite
EN-GJL, with nodular graphite
Grey cast iron,
Aluminium
Cast iron
cast iron EN-GJS, white an-
fine grinding
25-35
white cast iron
oxide A
nealed cast iron EN-GJMW,
black cast iron EN-GJMB
very fine
fine
fine
grinding
Fibre-reinforced plastics,
coarse grinding
coarse
coarse
thermoplastics,
Plastics
Plastics,
woods,
Aluminium
and other
fine grinding
10-25
wood, paint
chipboard,
oxide A
materials
paint,
very fine
melamine
fine
fine
grinding
204 I
31
Coated Abrasives
General Information
Belt grinder / abrasive belt compatibility table
Manu-
Model
Abrasive
Manu-
Model
Abrasive
Manu-
Model
Abrasive
facturer
belts
facturer
belts
facturer
belts
Length/
Length/
Length/
Width [mm]
Width [mm]
Width [mm]
PFERD
Atlas
BBS100
Makita
9901
Compressed air belt grinder
BA 100/620
BA 75/533
Copco
BBSE100
9900
PBS 3/200 DH 99
BA 3/305
HBSE75
9910 / 9911
BA 75/457
BA 6/305
BA 75/533
MBSE705
9402
BA 9/305
BA 100/610
BA 12/305
ATA
RAL15L
BA 10/480
9924DB
PBSA 5/210 HV 925
BA 3/520
BA 16/480
Metabo
Ba0775
BA 6/520
BA 20/480
Ba0875
BA 75/533
PBSA 5/160 HV 925
BA 12/520
BA 25/480
BA 16/520
Belton
20
BA 20/520
BaE0876Signal
PBSA 5/130 HV 925
BA 20/520
Ba6100
BA 100/610
Black&
405
BA 100/560
BA 6/610
PBSA 9/120 HV 925
Decker
BA 100/620
KA 75 E
BA 12/610
BA 75/533
BaE1075
BA 75/533
PBS 5/155 HV
BA 6/610
KA 75
Nieder-
P2/P5
BA 50/2500
BA 10/480
Bosch
270
BA 75/533
berger
BA 75/2500
BA 16/480
1270
BA 20/480
Rodac
8400
BA 20/520
BA 25/480
GBS100A
BA 100/620
Ryobi
B422
BA 100/560
BA 12/610
GBS100AE
B850F
BA 75/533
Electric belt grinders
PBS75
B7200A
BA 100/610
PBS75-E
UBS 5/100 SI 925
BA 3/520
BE 422
BA 100/560
PBS75A
BA 6/520
BA 75/533
BE424
BA 100/610
BA 12/520
PBS75AE
BA 100/620
BA 16/520
GBS75AE
BE 7076
BA 75/533
BA 20/520
DeWalt
DW431
BA 6/610
Scheppach
BSM 2010
BA 150/2000
BA 12/610
Dynabrade
11000
SKIL
400H
Pipe belt grinders
11142
405H
BA 100/560
40320
BA 6/610
445H
UBS 5/70 SI-R
BA 30/533
40330
BA 12/610
UBS 11/90 SI-R
BA 30/610
594U
BA 75/533
40335
Belt sander BSG for flexible
595U
shaft drives
40500
805H
BA 100/560
BSG 10/35E
BA 35/450
ELU
MHB-50
1100
BSG 10/50E
BA 50/450
MHB-90
1200
BA 100/560
BSG 3/10/40
BA 40/505
MHB-90E
1205
BA 75/457
Angle hand pieces
MHB-90K
1200 H
Festo
BUZ-S
BA 100/560
1205 H
WT 7 E M14 +
BA 3/520
Greif
D30HFS100
BA 50/2000
Suhner
BSG10/35
BA 35/450
BSVH 41
BA 6/520
D30-2-2
BA 75/2000
BA 12/520
BSG10/50
BA 50/450
WZ 7 B + BSVH 36
BA 16/520
Hitachi
SB10T
BA 100/610
BSG3/10/40
BA 40/505
BA 20/520
SB10V
BA 6/610
BSGV35
BA 35/450
WZ 10 B + BSVH 36
BA 12/610
SB-75
BA 75/533
BSGV50
BA 50/450
WZ 4 A +BSVH 24
BA 3/305
SB110
BA 110/620
LWC16Top
BA 6/520
BA 6/305
9924 DB
BA 75/610
BA 12/520
LWC21
BA 9/305
BA 16/520
Holz-Her
2210
BA 110/620
BA 12/305
LWG11
BA 20/520
AEG
BBS1100
2410
UBC10-R
BA 6/520
BA 100/560
2411
BA 75/533
BBSE1100
BA 12/520
2420
BA 16/520
HBS100
BA 100/560
BA 20/520
HBSE100
2422
BA 6/610
2423
BA 100/620
HBSE2110
BA 100/620
BA 12/610
2424
HBSE755
UTC7-R
BA 6/520
BA 75/533
Mafell
ZUB 1110
BA 110/620
BA 12/520
RBSE75AE
BA 16/520
BA 20/520
32
I
204
Coated Abrasives
Short Abrasive Belts
Suitable for coarse and fine grinding on metals
Ordering example:
Short belts
and wood.
EAN 4007220585269
Aluminium oxide A type
BA 10/480 A 80
Abrasive: Aluminium oxide A
How to order:
Ordering note:
BA
= Abrasive belt
The short belts
12
= Width T [mm]
BA 75/533 A 100
480
= Length L [mm]
BA 100/560 A 100
A
= Aluminium oxide A
are supplied in a packaging unit containing
40
= Grit size
20 pcs.
Please state required grit size.
Please take the short belt dimensions
(width T x length L [mm]) from the order no.
Order No.
Grit size
Acc. to
ISO
40
50
60
80
100
120
150
180
240
320
400
standards
EAN 4007220
BA
3/305 A
-
-
663899
663905
-
663912
-
663929
-
-
-
-
100
100
BA
6/305 A
-
-
664025
664032
-
664049
-
664056
-
-
-
-
100
200
BA
9/305 A
-
-
664179
664186
-
664193
-
664209
-
-
-
-
100
350
BA
12/305 A
664261
-
664278
664285
-
664445
-
664292
664308
664315
-
-
100
450
BA
10/330 A
-
-
620151
620168
-
620182
-
620199
-
-
-
2976
100
800
BA
12/330 A
-
-
620229
-
-
-
-
-
-
-
-
-
100
800
BA
35/450 A
-
-
585665
-
585672
-
-
-
664704
664711
-
-
10
200
BA
50/450 A
585719
-
585726
-
585733
-
-
-
664766
664773
-
2976
10
230
BA
13/457 A
620267
-
620274
620298
-
620304
-
-
-
-
-
2976
100
600
BA
75/457 A
600337
-
600351
600368
600375
600399
-
-
-
-
-
2976
20
590
BA
10/480 A
585542
-
585252
585269
-
585559
-
664247
664254
-
-
-
100
470
BA
16/480 A
585597
-
585368
585375
-
585382
-
664384
664391
-
-
-
50
400
BA
20/480 A
585610
664520
585429
585436
-
585443
664537
664544
664551
-
-
2976
10
150
BA
25/480 A
585634
-
585481
585498
-
585641
-
-
-
-
-
2976
20
380
BA
3/520 A
663950
-
663967
663974
-
663981
-
663998
664001
-
-
-
100
220
BA
6/520 A
585528
-
585191
585207
-
585214
-
664124
664131
664148
664155
2976
100
500
BA
12/520 A
585573
-
585306
585313
-
585320
-
664322
664339
664346
664353
-
100
1.000
BA
16/520 A
585603
-
585399
585405
-
585412
-
664407
664414
-
-
-
50
350
BA
20/520 A
585627
-
585450
585467
-
585474
-
664568
664575
-
-
2976
20
200
BA
30/533 A
620359
-
620380
620397
-
620410
-
664667
664674
664681
-
2976
20
350
BA
75/533 A
584958
-
584965
584972
-
584989
-
-
-
-
-
2976
10
350
BA
75/533 A
-
-
-
-
600429
-
-
-
-
-
-
2976
20
350
BA
100/560 A
584996
-
585009
585016
-
585023
-
-
-
-
-
2976
10
450
BA
100/560 A
-
-
-
-
600443
-
-
-
-
-
-
2976
20
450
BA
6/610 A
585535
-
585221
585238
-
585245
-
-
-
-
-
2976
100
300
BA
12/610 A
585580
-
585337
585344
-
585351
-
-
-
-
-
-
100
600
BA
30/610 A
776414
-
776421
776438
-
776445
-
776452
776469
776476
-
-
10
290
BA
100/610 A
585030
-
585047
585054
600467
585061
-
-
-
-
-
2976
10
500
BA
100/620 A
585085
-
585092
585108
600474
585115
-
-
-
-
-
2976
10
520
BA
100/920 A
620786
-
620793
620809
-
620823
-
-
-
-
-
-
10
1.000
204 I
33
Coated Abrasives
Short Abrasive Belts
Suitable for work on steel, stainless steel
Ordering example:
Short belts
(INOX), non-ferrous metals and cast iron with
EAN 4007220620205
Zirconia alumina Z type
flake graphite.
BA 10/330 Z 40
How to order:
For heavy-duty use and maximum stock
BA
= Abrasive belt
removal.
10
= Width T [mm]
330
= Length L [mm]
Abrasive: Zirconia alumina Z
Z
= Zirconia alumina Z
Ordering note:
40
= Grit size
The short belt BA 20/520 Z 36 is supplied in a
Please state required grit size.
packaging unit with 100 pcs.
Order No.
Grit size
Acc. to ISO
Width x
standards
length
36
40
60
80
T x L
[mm]
EAN 4007220
BA 10/330 Z
-
620205
620212
-
2976
10 x 330
100
500
BA 12/330 Z
-
-
620236
620250
-
12 x 330
100
450
BA 20/480 Z
-
586297
586235
586242
2976
20 x 480
10
160
BA 12/520 Z
-
586273
586198
586204
-
12 x 520
100
1.100
BA 20/520 Z
620342
-
-
-
2976
20 x 520
100
1.700
BA 20/520 Z
-
586303
586259
586310
2976
20 x 520
20
250
BA 12/610 Z
-
586280
586211
586228
-
12 x 610
100
750
Suitable for work on stainless steel (INOX) and
Ordering example:
Short belts
high-temperature materials.
EAN 4007220585993
A-COOL type
BA 35/450 A-COOL 40
The A-COOL type contains active additives
How to order:
resulting in a significant reduction of thermal
BA
= Abrasive belt
loads and a finer surface finish.
35
= Width T [mm]
450
= Length L [mm]
Abrasive: Aluminium oxide A-COOL
A
= Aluminium oxide A
INOX
= Bond type
40
= Grit size
Please state required grit size.
Order No.
Grit size
Acc. to ISO
Width x
standards
length
40
80
120
180
T x L
[mm]
EAN 4007220
BA 35/450 A-COOL
585993
586013
586020
586037
-
35 x 450
10
270
BA 50/450 A-COOL
586099
586105
586112
586129
2976
50 x 450
10
390
BA 40/505 A-COOL
586044
586051
586068
-
-
40 x 505
10
350
BA 30/610 A-COOL
776483
776490
776506
776513
-
30 x 610
10
290
34
I
204
Coated Abrasives
Short Abrasive Belts
For aggressive grinding with maximum stock
Ordering example:
Short belts
removal on hard materials which do not con-
EAN 4007220799215
Ceramic oxide CO-COOL type
duct heat well.
BA 6/305 CO-COOL 40
How to order:
Grinding additives in the coating clearly
BA
= Abrasive belt
improve stock removal, prevent clogging and
6
= Width T [mm]
allow cooler grinding.
305
= Length L [mm]
CO
= Ceramic oxide CO
Abrasive: Ceramic oxide CO-COOL
COOL
= Bond type
40
= Grit size
Please state required grit size.
Order No.
Grit size
Acc. to ISO
Width x
standards
length
40
60
80
120
T x L
[mm]
EAN 4007220
BA 6/305 CO-COOL
799215
799222
799239
799246
-
6 x 305
100
200
BA 9/305 CO-COOL
799352
799369
799376
799383
-
9 x 305
100
300
BA 12/305 CO-COOL
799444
799451
799468
799475
-
12 x 305
100
450
BA 10/330 CO-COOL
799390
799406
799413
799420
2976
10 x 330
100
800
BA 12/330 CO-COOL
799482
799499
799505
799536
-
12 x 330
100
800
BA 13/457 CO-COOL
799628
799635
799642
799659
2976
13 x 457
100
600
BA 16/480 CO-COOL
799666
799673
799680
799697
-
16 x 480
50
600
BA 20/480 CO-COOL
799741
799758
799772
799789
2976
20 x 480
20
300
BA 25/480 CO-COOL
799833
799840
799857
799864
2976
25 x 480
20
380
BA 6/520 CO-COOL
799260
799277
799284
799307
2976
6 x 520
100
500
BA 12/520 CO-COOL
799543
799550
799567
799574
-
12 x 520
100
1.000
BA 16/520 CO-COOL
799703
799710
799727
799734
-
16 x 520
50
350
BA 20/520 CO-COOL
799796
799802
799819
799826
2976
20 x 520
20
200
BA 30/533 CO-COOL
799871
799888
799895
799901
-
30 x 533
20
350
BA 6/610 CO-COOL
799314
799321
799338
799345
2976
6 x 610
100
300
BA 12/610 CO-COOL
799581
799598
799604
799611
-
12 x 610
100
600
BA 30/610 CO-COOL
799918
799925
799932
799949
-
30 x 610
10
290
204 I
35
Coated Abrasives
Short Abrasive Belts
Suitable for producing matt and satin-finished
Ordering example:
Short belts
surfaces on steel, stainless steels and
EAN 4007220586631
Non-woven material
non-ferrous metals.
VB 35/450 A 100 coarse
How to order:
VB
= Non-woven fabric belt
Abrasive: Aluminium oxide A
35
= Width T [mm]
450
= Length L [mm]
Available grit sizes:
A
= Aluminium oxide A
100/Coarse
= Colour: Yellowish-brown
100
= Grit size
180/Medium
= Colour: Red-brown
Please state required grit size.
240/Fine
= Colour: Blue
Recommendation for use:
Recommended cutting speed 10-20  m/s.
Order No.
Grit size
Acc. to ISO
Width x
standards
length
coarse
medium
fine
T x L
100
180
240
[mm]
EAN 4007220
VB 6/305 A
667552
667569
667545
-
6 x 305
10
55
VB 9/305 A
667668
667675
667620
-
9 x 305
10
70
VB 12/305 A
667637
667644
667651
-
12 x 305
10
100
VB 35/450 A
586631
586648
586655
-
35 x 450
10
360
VB 50/450 A
586662
586679
586686
2976
50 x 450
10
380
VB 6/520 A
586518
586525
586532
-
6 x 520
10
60
VB 12/520 A
586549
586556
586563
-
12 x 520
10
110
VB 16/520 A
586570
586587
586594
-
16 x 520
10
140
VB 20/520 A
586600
586617
586624
2976
20 x 520
5
90
VB 30/533 A
667699
667705
667682
2976
30 x 533
5
190
VB 30/610 A
776520
776537
776551
-
30 x 610
5
190
Tool Sets
Tool Sets with Drives
Electric belt grinder set with stepless speed
Contents:
Belt grinder set
range regulation for general surface work
■■1 electric belt grinder UBS 5/100 SI 925 with
from coarse to very fine processing.
stepless speed regulation,
500 watts power output .
This allows optimised speed range regulation
■■2 abrasive belts each: 6 and 12 mm width,
for the use of abrasive belts with high speed
grit 40, 60, 80, 120 and 180.
ranges or of non-woven belts with low speed
■■2 non-woven belts each: coarse, medium
ranges.
and fine.
Recommendation for use:
Ideal for all belt grinding work, in particular
Use higher RPM levels (settings 4-6) with
for construction work. The belt speeds can be
coated abrasive belts
regulated electronically and steplessly within
and lower RPM (settings 1-4); with non-woven
the speed range 6,5 to 16 m/s.
cloth-backed belts.
Please refer to catalogue 209 for detailed
Safety note:
information and order data regarding tool
Abrasive belts:
drives.
max. peripheral speed 32 m/s.
Non-woven belts:
max. peripheral speed 25 m/s
Order No.
EAN
4007220
SET BA 6-12/520 UBS 5/100 230 V
344125
1
6.100
36
I
204
Coated Abrasives
Long Abrasive Belts
PFERD provides a comprehensive range of long
Application examples
belts.
■■Fine-grinding of larger surfaces in multiple
steps.
They differ in:
■■Surface texturing.
■■Dimensions,
■■Creation of uniform visual effects on large
■■grit sizes and
surfaces.
■■abrasives used.
The PFERD range is aligned with the standard
Recommendations for use
belt grinders available on the market.
The use of the appropriate grinding oil on the
different materials can substantially increase
PFERD long belts are designated “Abrasive
the tool life and the abrasive performance of
belts” according to ISO 2976.
tools made from coated abrasives. For detailed
information and order data regarding grinding
Advantages
oils, please refer to page 110.
■■High abrasive performance.
■■High tensile strength.
Safety note
■■Excellent grit adhesion.
Observe the VDS (Verband deutscher Schleif-
■■Long tool life.
mittelwerke: Association of German Abrasive
Manufacturers) safety guidelines “Safety
guidelines for the correct use of abrasive
belts”. You can find this information on our
homepage, www.pferd.com.
Safety recommendations
= Wear eye protection!
= Wear gloves!
= Wear hearing protection!
= Wear a respirator!
= Read the instructions!
= Not permitted for wet grinding!
Long belts are suitable for coarse and fine
Ordering example:
Long belts
grinding on metals and wood. They can be
EAN 4007220621059
Aluminium oxide A type
used on all commercial and special belt grind-
BA 50/1000 A 60
ers in industry and crafts.
How to order:
BA
= Abrasive belt
The long belts accord with ISO 2976.
50
= Width T [mm]
1000
= Length L [mm]
Abrasive: Aluminium oxide A
A
= Aluminium oxide
40
= Grit size
Please state required grit size.
Order No.
Grit size
Width x
length
36
40
60
80
120
T x L
[mm]
EAN 4007220
BA 50/1000 A
-
-
621059
621066
621073
50 x 1.000
10
580
BA 100/1000 A
-
585917
585924
585931
585948
100 x 1.000
10
1.000
BA 50/2000 A
-
585771
585788
585795
585801
50 x 2.000
10
1.100
BA 75/2000 A
600481
585832
585849
585856
585863
75 x 2.000
10
2.000
BA 150/2000 A
600597
585955
585962
585979
-
150 x 2.000
10
4.000
BA 75/2500 A
620373
585870
585887
585894
585900
75 x 2.500
10
2.800
204 I
37
Coated Abrasives
Long Abrasive Belts
Designed for very cool grinding and long tool
Ordering example:
Long belts
life.
EAN 4007220620243
Z-FORTE type
BA 75/2000 Z 40 FORTE
Particularly suitable for work on thin-walled
How to order:
stainless steel components (INOX) and steels
BA
= Abrasive belt
or nickel-based alloys which do not conduct
75
= Width T [mm]
heat well.
2000
= Length L [mm]
Z
= Zirconia alumina Z
Abrasive: Zirconia aluminia Z-FORTE
40
= Grit size
Please state required grit size.
FORTE
= Bond type
Order No.
Grit size
Width x
length
36
40
50
60
80
T x L
[mm]
EAN 4007220
BA 50/1600 Z ... FORTE
621110
-
621127
621134
621158
50 x 1.600
10
1.200
BA 75/2000 Z ... FORTE
620175
620243
620281
620311
620335
75 x 2.000
10
2.200
BA 75/2500 Z ... FORTE
620458
620502
620533
-
-
75 x 2.500
10
3.100
For heavy-duty use and maximum stock
Ordering example:
Long belts
removal.
EAN 4007220586457
Zirconia alumina Z type
BA 100/1000 Z 40
For work on steel, stainless steel (INOX),
How to order:
non-ferrous metals and cast iron with flake
BA
= Abrasive belt
graphite.
100
= Width T [mm]
1000
= Length L [mm]
The long belts accord with ISO 2976.
Z
= Zirconia alumina Z
24
= Grit size
Abrasive: Zirconia alumina Z
Please state required grit size.
Order No.
Grit size
Width x
length
24
36
40
60
80
120
T x L
[mm]
EAN 4007220
BA 100/1000 Z
-
-
586457
586464
586471
621042
100 x 1.000
10
1.500
BA 50/2000 Z
621219
621233
586327
586334
586341
619353
50 x 2.000
10
1.500
BA 75/2000 Z
600511
586358
586365
586372
586389
586396
75 x 2.000
10
2.500
BA 150/2000 Z
-
600641
586488
586495
586501
600672
150 x 2.000
10
5.000
BA 75/2250 Z
-
-
613191
613214
-
-
75 x 2.250
10
2.200
BA 75/2500 Z
-
586402
586419
586426
586433
-
75 x 2.500
10
2.800
BA 150/2500 Z
-
621141
-
-
-
-
150 x 2.500
10
6.600
38
I
204

Program

PFERD sajam 2016

Pozovite nas:
+381 21 504 272




  •                 
  •     




Tehnoalat d.o.o.
Export - import

Pitagorina 1,
21000 Novi Sad
Republika Srbija

Tel: +381 21 504 272
504 273; 504 274
Fax: +381 21 504 272



© Copyright 2012 Tehnoalat. Design by Massive.