HSS Hole Saws
Application Examples and Recommendations
Hole saws, made of shatter-proof and tough
Recommendations for use
HSS bimetal are used on drilling machines and
■■The pilot drill is clamped in the hole saw
hand-held drills.
shank and should project at least 3 mm
(1/8”) over the hole saw teeth.
Advantages
■■When sawing metal, use a high-quality
■■Cost-effective sawing of round cut outs.
cutting oil. The cutting oil facilitates smooth
■■Can be used on diverse materials such as
running and lengthens the hole saw life.
alloy and non-alloy steels, stainless steel
Exceptions: Do not use cutting oil when
(INOX) - please observe recommended use -
working on cast iron. When working on alu-
cast iron, aluminium, copper, bronze, brass,
minium add kerosene instead of cutting oil.
wood, plastics etc.
■■HSS hole saws are suitable for work on
■■Hole saws have an alternating tooth pitch
stainless steel (INOX).
which prevents chattering during sawing.
■■To avoid corrosion, particles resulting during
■■PFERD offers a range of the most common
work must be removed. We recommend
HSS hole saws in sets for tradesmen, fitters,
either mechanical or chemical cleaning
electricians and mechanics.
(etching/polishing etc.)
■■Hole saws are centred and guided via the
■■All teeth should be applied evenly. Avoid
Safety recommendations
HSS pilot drill (supplied with compression
swinging movements during sawing to
spring for improved ejection of the sawn
avoid tooth breaks.
When using shank extensions, the recom-
material).
■■Avoid overheating the hole saw.
mended hole saw speed ranges must not be
exceeded. Risk of accidents!
= Wear eye protection!
Read the instructions!
=
(Please observe the
recommended RPM!)
Application examples for HSS hole saws and TC hole cutters
ø [mm]
Application examples
ø [mm]
Application examples
25,0
Plumbing and heating pipes
65,0
Pattress boxes dia. 65 mm (e.g.
power sockets)
30,0
Plumbing and heating pipes
68,0
Pattress boxes dia. 68 mm
32,0
Sink fittings dia. 32 mm
35,0
Sanitary and heating pipes,
70,0
Hollow wall junction boxes
dia. 70 mm
hollow wall junction boxes,
halogen spots
74,0
Hollow wall junction boxes
dia. 74 mm
40,0
Sanitary drain pipes
80,0
Distribution boxes, built-in lights,
45,0
Water and heating pipes
cable opening covers dia. 80 mm
50,0
Water and heating pipes, insulated
90,0
Built-in lights dia. 90 mm
55,0
Built-in lights dia. 55 mm
105,0
Waste air pipes
60,0
Built-in lights dia. 60 mm
56
I
202
HSS Hole Saws
HSS Hole Saws and Sets
Please refer to table below for maximum
Ordering note:
HSS hole saws
cutting depth.
Please order hole saw arbors separately. Please
refer to page 60 for detailed information on
Thread:
hole saw arbors.
LS 14-LS 30 = 1/2-20
Ordering example:
LS 32-LS 152 = 5/8-18
EAN 4007220319086
LS 14
Packaging unit 1 piece
Order No.
EAN
Dia. D
Dia. d
Max.
Max.
Rec.
Rec.
Rec.
Rec.
Rec.
Suitable
4007220
[mm]
[Inch]
cutting
cutting
[RPM]
[RPM]
[RPM]
[RPM]
[RPM]
arbors
[mm]
[Inch]
Steel,
Steel,
Stainless
Non-
Cast iron
cast
cast
steel
ferrous
steel
steel
(INOX)
metals
< 700
> 700
N/mm2
< 1.000
N/mm2
LS
14
319086
14
9/16
34
1 5/16
620
310
310
800
400
LSS 1,
4
28
LS
16
062319
16
5/8
34
1 5/16
550
275
275
730
365
LSS 1,
4
29
LS
17
319093
17
11/16
36
1 7/16
520
260
260
680
340
LSS 1,
4
32
LS
19
062326
19
3/4
36
1 7/16
460
230
230
600
300
LSS 1,
4
40
LS
20
062333
20
-
36
1 7/16
425
210
210
560
280
LSS 1,
4
42
LS
21
319109
21
13/16
36
1 7/16
410
205
205
540
270
LSS 1,
4
43
LS
22
062340
22
7/8
36
1 7/16
390
195
195
520
260
LSS 1,
4
50
LS
24
319116
24
15/16
36
1 7/16
360
180
180
470
235
LSS 1,
4
57
LS
25
062357
25
1
36
1 7/16
350
175
175
470
235
LSS 1,
4
60
LS
27
062364
27
1 1/16
36
1 7/16
325
160
160
435
215
LSS 1,
4
66
LS
29
062371
29
1 1/8
36
1 7/16
300
150
150
400
200
LSS 1,
4
68
LS
30
062388
30
1 3/16
36
1 7/16
285
145
145
380
190
LSS 1,
4
75
LS
32
062395
32
1 1/4
36
1 7/16
275
140
140
360
180
LSS
2
82
LS
33
062401
33
1 5/16
36
1 7/16
260
135
135
345
175
LSS
2
102
LS
35
062418
35
1 3/8
36
1 7/16
250
125
125
330
165
LSS
2
108
LS
37
319123
37
1 7/16
36
1 7/16
235
115
115
310
155
LSS
2
111
LS
38
062425
38
1 1/2
36
1 7/16
230
115
115
300
150
LSS
2
112
LS
40
319130
40
1 9/16
36
1 7/16
215
110
110
280
140
LSS
2
114
LS
41
062432
41
1 5/8
36
1 7/16
210
105
105
280
140
LSS
2
115
LS
43
319147
43
1 11/16
31
1 1/4
200
100
100
260
130
LSS
2
116
LS
44
062449
44
1 3/4
31
1 1/4
195
95
95
260
130
LSS
2
118
LS
46
319154
46
1 13/16
31
1 1/4
185
90
90
250
125
LSS
2
119
LS
48
062456
48
1 7/8
31
1 1/4
180
90
90
240
120
LSS
2
122
LS
51
062463
51
2
31
1 1/4
170
85
85
230
115
LSS
2
124
LS
52
319161
52
2 1/16
31
1 1/4
165
80
80
220
110
LSS
2
130
LS 54
062470
54
2 1/8
31
1 1/4
160
80
80
210
105
LSS 2
140
LS 57
062487
57
2 1/4
31
1 1/4
150
75
75
200
100
LSS 2
150
LS 59
319178
59
2 5/16
31
1 1/4
145
70
70
190
95
LSS 2
156
LS 60
062494
60
2 3/8
31
1 1/4
140
70
70
190
95
LSS 2
165
LS 64
062500
64
2 1/2
31
1 1/4
135
65
65
180
90
LSS 2
180
LS 65
319185
65
2 9/16
31
1 1/4
135
60
60
180
90
LSS
2
190
LS
67
062517
67
2 5/8
31
1 1/4
130
65
65
170
85
LSS
2
200
LS
68
500811
68
2 11/16
31
1 1/4
130
65
65
170
85
LSS
2
205
LS
70
062524
70
2 3/4
31
1 1/4
125
60
60
160
80
LSS
2
210
LS
73
062531
73
2 7/8
31
1 1/4
120
60
60
160
80
LSS
2
225
LS
76
062548
76
3
31
1 1/4
115
55
55
150
75
LSS
2
245
LS
79
062555
79
3 1/8
31
1 1/4
110
55
55
140
70
LSS
2
260
LS
83
062562
83
3 1/4
31
1 1/4
105
50
50
140
70
LSS
2
285
LS
86
319192
86
3 3/8
31
1 1/4
100
50
50
130
65
LSS
2
310
Continued on next page.
202 I
57
HSS Hole Saws
HSS Hole Saws and Sets
Please refer to table below for maximum
Ordering note:
HSS hole saws
cutting depth.
Please order hole saw arbors separately. Please
refer to page 60 for detailed information on
Thread:
hole saw arbors.
LS 14-LS 30 = 1/2-20
Ordering example:
LS 32-LS 152 = 5/8-18
EAN 4007220062579
LS 89
Packaging unit 1 piece
Continued from last page.
Order No.
EAN
Dia. D
Dia. d
Max.
Max.
Rec.
Rec.
Rec.
Rec.
Rec.
Suitable
4007220
[mm]
[Inch]
cutting
cutting
[RPM]
[RPM]
[RPM]
[RPM]
[RPM]
arbors
[mm]
[Inch]
Steel,
Steel,
Stainless
Non-
Cast iron
cast
cast
steel
ferrous
steel
steel
(INOX)
metals
< 700
> 700
N/mm2
< 1.000
N/mm2
LS 89
062579
89
3 1/2
31
1 1/4
95
45
45
130
65
LSS 2
320
LS 92
062586
92
3 5/8
31
1 1/4
95
45
45
120
60
LSS 2
335
LS 95
062593
95
3 3/4
31
1 1/4
90
45
45
120
60
LSS 2
350
LS 98
319208
98
3 7/8
31
1 1/4
90
45
45
120
60
LSS 2
370
LS 102
062609
102
4
31
1 1/4
85
40
40
110
55
LSS 2
390
LS 105
062616
105
4 1/8
31
1 1/4
80
40
40
110
55
LSS 2
420
LS 111
319222
111
4 3/8
31
1 1/4
75
35
35
100
50
LSS 2
475
LS 114
062623
114
4 1/2
31
1 1/4
75
35
35
100
50
LSS 2
490
LS 121
319239
121
4 3/4
31
1 1/4
70
35
35
90
45
LSS 2
550
LS 127
319246
127
5
31
1 1/4
65
30
30
80
40
LSS 2
595
LS 140
319253
140
5 1/2
31
1 1/4
60
30
30
75
40
LSS 2
720
LS 152
319260
152
6
31
1 1/4
55
25
25
70
35
LSS 2
850
Contains the most common diameters for use
Contents:
Set for craftsmen
in the crafts.
5 HSS hole saws LS 22, LS 25, LS 29, LS 32,
LS 38
The set is delivered neatly arranged in a pro-
1 hole saw arbor LSS 4
tective plastic box. The Operating Instructions
1 LSA adapter for a hole saw arbor LSS 4
are included.
1 allen key, 4 mm
1 ejection spring
It is possible to use the LS 32 and LS 38 hole
saws with the LSA adapter (with washer).
Order No.
EAN
Dimension
4007220
[mm]
LS-SO 7 H
319314
168 x 116 x 57
1
600
58
I
202
HSS Hole Saws
HSS Hole Saws and Sets
Contains the most common diameters for
Contents:
Set for plumbers
plumbers and sanitary engineers.
6 HSS hole saws LS 19, LS 22, LS 29, LS 38, LS
44, LS 57
The set is neatly arranged in a protective
2 hole saw arbors LSS 2, LSS 4
plastic box. The operating instructions are
1 LSA adapter for a hole saw arbor LSS 4
included.
1 allen key, 4 mm
1 ejection spring
It is possible to use the LS 38 hole saw in con-
nection with the LSA adapter (with washer).
Order No.
EAN
Dimension
4007220
[mm]
LS-SO 9 I
319338
219 x 156 x 60
1
1.035
Contains the most common international
Contents:
Set for electricians
diameters for electricians.
6 HSS hole saws LS 22, LS 29, LS 35, LS 44, LS
(International standard sizes)
51, LS 64
The set is neatly arranged in a protective
2 hole saw arbors LSS 2, LSS 4
plastic box. The operating instructions are
1 LSA adapter for a hole saw arbor LSS 4
included.
1 allen key, 4 mm
1 ejection spring
It is possible to use the LS 35 hole saw in con-
nection with the LSA adapter (with washer).
Order No.
EAN
Dimension
4007220
[mm]
LS-SO 9 E-1
319321
219 x 156 x 60
1
1.200
Contains the most common German diam-
Contents:
Set for electricians
eters for electricians.
9 HSS hole saws LS 19, LS 22, LS 25, LS 32, LS
(German standard sizes)
38, LS 44, LS 51, LS 60, LS 68
The set is neatly arranged in a protective
2 hole saw arbors LSS 2, LSS 4
plastic box. The operating instructions are
1 LSA adapter for a hole saw arbor LSS 4
included.
1 pilot drill LSB 6/90
1 allen key, 4 mm
It is possible to use the LS 38 hole saw in con-
1 ejection spring
nection with the LSA adapter (with washer).
Order No.
EAN
Dimension
4007220
[mm]
LS-SO 13 E-2
319369
219 x 156 x 60
1
1.330
Contains the most common diameters for
Contents:
Set for engineers
engineers in construction, containers and
9 HSS hole saws LS 19, LS 22, LS 29, LS 35, LS
pipeline industries.
38, LS 44, LS 51, LS 57, LS 64
2 hole saw arbors LSS 2, LSS 4
The set is neatly arranged in a protective
1 pilot drill LSB 6/90
plastic box. The operating instructions are
1 LSA adapter for a hole saw arbor LSS 4
included.
1 allen key, 4 mm
1 ejection spring
It is possible to use the LS 35 and LS 38 hole
saws in connection with the LSA adapter (with
washer).
Order No.
EAN
Dimension
4007220
[mm]
LS-SO 13 M
319352
219 x 180 x 66
1
1.610
202 I
59
HSS Hole Saws
Hole Saw Arbors
Hole saw arbors are designed for mounting
a particular application, e.g. ready-installed
Hole saw arbors LSS
the hole saw and the pilot drill.
pipes, the spring can easily be removed manu-
ally without the help of tools.
The PFERD range includes three different sizes.
Ordering note:
Select the appropriate arbor, taking into ac-
LSS 1
The hole saw arbors LSS 1 and LSS 2 are deliv-
count the hole saw diameter and available tool
ered with the HSS pilot drill LSB 6/60 and one
drive spindle.
ejection spring.
LSS 2
Purpose of the compression spring
The hole saw arbor LSS 4 is delivered with
This prevents “jamming” of the sawn-out
the HSS pilot drill LSB 6/90 and one ejection
material between the inner walls of the hole
spring.
saw and the drill. The spring force ejects the
LSS 4
material. Should this effect not be required for
Order No.
EAN
Shank dia.
Shank dia.
Thread
Shank type
Suitable for
4007220
[mm]
[inch]
[inch]
hole saws
LSS 1
062630
9,53
3/8
1/2 - 20 UNF
hexagonal
LS 14 - 30
1
82
LSS 2
062647
9,53
3/8
5/8 - 18 UNF
hexagonal
LS 32 - 152
1
205
LSS 4
062661
6,35
1/4
1/2 - 20 UNF
round
LS 14 - 30
1
72
Arbor shapes
PFERD-
Shank dia.
Shank dia.
Shank
for PFERD
hole saw arbors no.
[mm]
[inch]
shape
hole saw no.
The adjacent table shows information on
shank forms, LSS dimensions and LSB pilot
drills. The appropriate PFERD hole saws have
been shown.
LSS 1
9,53
3/8
LS 14 - LS 30
LSS 2
9,53
3/8
LS 32 - LS 152
LSS 4
6,35
1/4
LS 14 - LS 30
Pilot drill
for hole saw arbors
LSB 6/60
6,35
1/4
LSS 1, 2, 4
LSB 6/90
6,35
1/4
LSS 1, 2, 4
10,5
Shank dimensions
[mm]
Compression spring
All hole saw arbors are delivered with a com-
pression spring for better ejection of the sawn
material.
Before application, this compression spring can
be installed/deinstalled if required. Screw on
the compression spring from the side with the
smaller diameter up to its limit. It is also pos-
sible to use the compression spring with the
LSA adapter (see diagram).
60
I
202
HSS Hole Saws
Hole Saw Arbors
The HSS hole saw arbors LSS 1 and LSS 2
■■Achieves the required distance between the
Arbor extension for hole saws
can be extended using the arbor extension
power source and the work area.
SVL-300.
■■Avoids damage to workpiece and machine.
■■Dust is not drawn into the power source
Advantages:
during sawing.
■■Suitable for work on hard-to-reach compo-
nents.
■■Particularly suitable for work on hollow
walls. Deep holes can be sawn with ease.
Order No.
EAN
Hexagon
Hexagon
Overall
Overall
Shank type
Width
Suitable for
4007220
socket (sw)
socket (sw)
length
length
across
[mm]
[Inch]
[mm]
[inch]
flats [mm]
SVL-300
798447
9,53
3/8
300
12
hexagonal
11
LSS 1, LSS 2
1
341
With the repair set for hole saw arbors the
Contents:
Repair set for hole saw arbors
most common parts can be replaced in case of
2 compression springs
loss or damage.
2 hexagon socket head screws
1 hexagon socket wrench SW 4
Order No.
EAN
4007220
RSL-5
758953
1
34
Hole saws LS 32 to LS 38 can be used with
Recommendation for use:
LSA adapter
the LSA adapter, a washer and the hole saws
We do not recommend using the adapter
arbors LSS 1 and LSS 4.
for hole saws with a diameter of more than
38 mm.
Order No.
EAN
Suitable for hole saws
Suitable for
4007220
arbor
LSA
319291
LS 32 - 38
LSS 1, 4
1
18
HSS Pilot Drill for HSS Hole Saws
The hole saw arbors LSS 1 and LSS 2 are deliv-
Ordering example:
HSS pilot drill LSB
ered with the HSS pilot drill LSB 6/60.
EAN 4007220319284
LSB 6/60
The hole saw arbor LSS 4 is delivered with the
LSB 6/60
HSS pilot drill LSB 6/90.
LSB 6/90
Order No.
EAN
Shank dia.
Shank dia.
Shank
Suitable for
Suitable for
4007220
[mm]
[inch]
type
hole saws
arbor
LSB 6/60
319284
6,35
1/4
round
LS 14 - 152
LSS 1, 2
1
18
LSB 6/90
062708
6,35
1/4
round
LS 14 - 152
LSS 4
1
24
202 I
61

Program

PFERD sajam 2016

Pozovite nas:
+381 21 504 272




  •                 
  •     




Tehnoalat d.o.o.
Export - import

Pitagorina 1,
21000 Novi Sad
Republika Srbija

Tel: +381 21 504 272
504 273; 504 274
Fax: +381 21 504 272



© Copyright 2012 Tehnoalat. Design by Massive.