Coated Abrasive Tools
POLIFLAP® Tools
The grinding wheel consists of a shankmount-
Recommendation for use:
POLIFLAP® grinding wheel
ed (Sd = ø 12 mm) hub carrying an array of
This product is used preferably on straight
rubber flaps. For use, appropriate abrasive
grinders and flexible shaft systems.
flaps must be fitted between their rubber
On stainless steel, an optimum surface finish
counterparts.
is obtained in the 1.400-1.700 RPM speed
The combination arrangement of abrasive and
range.
rubber flaps results in a highly flexible tool.
Ordering note:
POLIFLAP® grinding wheels are supplied
Application examples:
without abrasive flaps. Please order abrasive
■■Redressing and restoration of surface
flaps separately, specifying the desired grit size
textures.
(refer to the table at centre page).
■■Fine-grinding of radii, contours, curved
areas or large surfaces.
■■Removal of fine secondary burr.
■■Removal of heat discoloration.
■■Surface cleaning.
Order No.
EAN
D x T
Sd
Recom.
Max. speed
4007220
[mm]
[mm]
speed
[RPM]
[RPM]
PFL 17060/12
725405
170 x 60
12
1.500
3.500
1
590
PFERD has eight different grit sizes to help you
POLIFLAP® abrasive flaps
achieve the required visual effect.
After the abrasive elements have worn down,
they can easily be replaced on the grinding
wheel.
In order to be completely equipped, you
require 12 abrasive flaps (1 pack).
Please order the initial flaps and any additional
flaps as separate items.
Ordering example:
EAN 4007220725276
PFL-SL A 60
Please state the required grit size.
Order No.
Grit size
Width x
length
60
80
100
120
150
180
220
320
T x L
[mm]
EAN 4007220
PFL-SL A
725276
725283
725290
725306
725313
725320
725337
725344
60 x 75
12
100
The rubber flaps which lie between the abra-
POLIFLAP® rubber flaps
sive flaps support the grinding effect and the
flexibility of the tool.
After the rubber flaps have worn down, they
can easily be replaced on the grinding wheel.
In order to fill the wheel, you require 12 rub-
ber flaps (1 pack).
Order No.
EAN
Width x
4007220
length
T x L
[mm]
PFL-GL
725412
55 x 50
12
190
66
I
204
Tool Sets
Tool Sets with Drives
High-power output electric grinder in set
Contents:
POLIFLAP® set
with PFERD tools for brush matting, and for
■■1 electric grinder UGER 15/30 SI
blending on medium and large surfaces, in
■■1 collet each, ø 6, 8 and 12 mm
particular on stainless steel (INOX).
■■1 hexagon socket wrench 6 mm
■■2 single-head spanners SW 22
High, consistent speed performance, even
■■1 POLIFLAP® grinding wheel
under load. Insulated motor, integrated over-
PFL 17060/12
load protection, user-friendly, robust construc-
■■with abrasive flaps PFL-SL
tion. Stepless slectronic speed regulation with-
grit sizes (A 60, A 80, A 100, A 120, A 150,
in the 750 to 3.000 RPM speed range.
A 180, A 220, A 320)
Please refer to catalogue 209 for information
■■1 POLINOX® mounted point
and order data regarding tool drives.
PNG 10050/6 SiC 180
■■1 Poliflex® mounted texturing point
PF ZY 10030/8 CU 16 PU-STRUC
Order No.
EAN
4007220
SET PFL 17060 UGER 15/30 SI 230 V
777343
1
9.200
Coated Abrasive Tools
Overlap Slotted Discs
Special tools for side grinding in fillets and
Ordering note:
Overlap slotted discs
slots. They are mounted via a central threaded
Please order arbors separately.
hub.
Ordering example:
EAN 4007220152706
Advantages:
KS 30-4 A 80
■■Tool provides abrasive action on both its
front and rear side.
How to order:
■■The two-sided overlapping fan structure is
KS
= Overlap slotted disc
flexible and ideal for deburring in grooves,
30
= Dia. D [mm]
slots and finned structures.
4
= No. of layers
A
= Aluminium oxide A
Recommendation for use:
80
= Grit size
By holding the tool at an angle it is possible to
machine opposing slot faces simultaneously.
Order No.
Grit size
EAN
D x T
No.
Recom.
Max. speed
Suitable arbor
4007220
[mm]
of layers
speed
[RPM]
[RPM]
KS 30-4 A
80
152706
30 x 5
4
6.500
12.000
BO KS 30
20
84
KS 50-4 A
80
152768
50 x 5
4
4.000
8.000
BO KS 50
20
260
Reduces setup times significantly. Discs can be
Arbor for overlap slotted discs
changed without removing the arbor from the
collet mounted in the machine.
L
BO KS 30
S
L
BO KS 50
S
Order No.
EAN
S x L
Thread
4007220
[mm]
BO KS 30
152164
6 x 40
1/8 BSW
1
11
BO KS 50
152157
6 x 40
1/4-28 UNF
1
16
204 I
67
Coated Abrasive Tools
POLISTAR
Flexible tools for work on the inner surfaces of
bores and pipes.
Advantages
■■High flexibility.
■■Perfect for grinding internal surfaces of
small-diameter bores or pipes.
■■Their small sizes makes these tools particu-
larly suitable for the 7-40 mm diameter
range.
Recommendations for use
POLISTAR tools perform best at the recom-
mended peripheral speed of 15-20 m/s.
POLISTAR pads can be stacked in several
Ordering note
layers. To benefit from a maximum abrasive
surface area, ensure that the lobes of the
Please order the arbor separatly.
individual star pads are aligned offset.
POLISTAR are delivered in sheet form.
PST 20/1,6 for center hole ø 7-15 mm
Sheet contents:
PST 30/1,6 for center hole ø 10-20 mm
ø 20 and 30 mm = 25 pcs.
PST 40/3 for center hole ø 15-25 mm
ø 40 and 50 mm = 10 pcs.
PST 50/3 for center hole ø 20-40 mm
Safety note
For safety reasons, it is imperative to remain
within the specified RPM limit at all times.
Application examples:
Ordering example:
POLISTAR
■■Cleaning, fine grinding and ultrafine finish-
EAN 4007220661345
ing of bores.
PST 20/1,6 A 60
■■Post-weld removal of metal discolorations in
How to order:
stainless steel pipes.
PST
= POLISTAR
■■Inlet and outlet radiusing of bores/holes.
20
= Dia. D [mm]
■■Light deburring work on bores (removal of
1,6
= Centre hole dia. H [mm]
secondary burrs) in preparation of coating.
A
= Aluminium oxide A
■■Deburring in cross-bores.
60
= Grit size
Please state required grit size.
Order No.
Grit size
Dia. D
H
Recom.
Max.
Suitable arbor
[mm]
[mm]
speed
speed
60
80
120
[RPM]
[RPM]
EAN 4007220
PST 20/1,6 A
661345
661444
661451
20
1,6
15.000
38.000
BO 2,3/1,6 1-5, BO 3/1,6 1-5
100
90
PST 30/1,6 A
661468
661482
661512
30
1,6
9.500
25.000
BO 2,3/1,6 1-5, BO 3/1,6 1-5
100
160
PST 40/3,0 A
661543
661550
661567
40
3,0
7.200
19.000
BO 6-3 1-6
100
250
PST 50/3,0 A
661574
661581
661598
50
3,0
5.700
15.000
BO 6-3 1-6
100
310
Arbors
Reduces setup times significantly. Pads can be
Arbor
changed without removing the arbor from the
L
collet mounted in the machine.
S
Order No.
EAN
S x L
Clamping
Suitable for
4007220
[mm]
width
centre hole
[mm]
[mm]
BO 2,3/1,6 1-5
151570
2,34 x 43
1-5
1,6
10
20
BO 3/1,6 1-5
151587
3 x 43
1-5
1,6
10
34
BO 6/3 1-6
505694
6 x 40
1-6
3
1
38
68
I
204

Pferd

Program

PFERD sajam 2016

Pozovite nas:
+381 21 504 272




  •                 
  •     




Tehnoalat d.o.o.
Export - import

Pitagorina 1,
21000 Novi Sad
Republika Srbija

Tel: +381 21 504 272
504 273; 504 274
Fax: +381 21 504 272



© Copyright 2012 Tehnoalat. Design by Massive.