Cut-Off Wheels
Performance Line SG-ELASTIC (ø 300 - 400 mm)
Special-purpose tool in hardness grade S.
Steel
PFERD design with high cutting capabilities
Hard type - hardness grade S
and long tool life for use on hand-held cut-off
machines ø 300-400 mm.
Abrasive: Aluminium oxide A
Workpiece materials:
Steel, cast iron
Application:
Cutting of solid material and profiles
Recommendation for use:
Can be used on hand-held cut-off grinding
machines with electric, high-frequency or
EHT
petrol motors.
Alternative discs with dia. 300 mm for 80 m/s
and 100 m/s are available to match existing
machines.
Ordering note:
Please specify centre hole dia. and maximum
operating speed required (80 or 100 m/s).
Order No.
EAN
EN-designation
D x T x H
Max. speed
4007220
[mm (inch)]
[RPM]
Maximum operating speed 80 m/s, flat type EHT (Form 41)
80 EHT 300-4,0 A 24 S SG/20,0
162460
41 A 24 S BF 80
300 x 4,0 x 20,0
5.100
20
12,800
80 EHT 300-4,0 A 24 S SG/22,23
162477
41 A 24 S BF 80
300 x 4,0 x 22,23 (7/8)
5.100
20
12,800
80 EHT 300-4,0 A 24 S SG/25,4
162484
41 A 24 S BF 80
300 x 4,0 x 25,4 (1)
5.100
20
12,800
Maximum operating speed 100 m/s, flat type EHT (Form 41)
100 EHT 300-4,0 A 24 S SG/20,0
540008
41 A 24 S BF 100
300 x 4,0 x 20,0
6.400
20
12,800
100 EHT 300-4,0 A 24 S SG/22,23
540015
41 A 24 S BF 100
300 x 4,0 x 22,23 (7/8)
6.400
20
12,800
100 EHT 300-4,0 A 24 S SG/25,4
540022
41 A 24 S BF 100
300 x 4,0 x 25,4 (1)
6.400
20
12,800
100 EHT 350-4,5 A 24 S SG/20,0
540039
41 A 24 S BF 100
350 x 4,5 x 20,0
5.500
10
10,000
100 EHT 350-4,5 A 24 S SG/22,23
540046
41 A 24 S BF 100
350 x 4,5 x 22,23 (7/8)
5.500
10
10,000
100 EHT 350-4,5 A 24 S SG/25,4
540053
41 A 24 S BF 100
350 x 4,5 x 25,4 (1)
5.500
10
10,000
100 EHT 400-4,8 A 24 S SG/22,23
540060
41 A 24 S BF 100
400 x 4,8 x 22,23 (7/8)
4.800
10
13,000
100 EHT 400-4,8 A 24 S SG/25,4
540077
41 A 24 S BF 100
400 x 4,8 x 25,4 (1)
4.800
10
13,000
Special-purpose tool in hardness grade N-Alu.
Aluminium/non-ferrous metals
PFERD design with high cutting capabilities
Soft type - hardness grade N
and long tool life. Does not clog up. Suit-
able for use on hand-held cut-off machines
dia. 300-350 mm.
Abrasive: Aluminium oxide A
Workpiece materials:
Tough and hard aluminium, non-ferrous
metals
Application:
Cutting of solid material and sections
Recommendation for use:
EHT
Can be used on hand-held cut-off machines
with electric, high-frequency or petrol motors.
Ordering note:
Please specify centre hole dia. on order.
Order No.
EAN
EN-designation
D x T x H
Max. speed
4007220
[mm (inch)]
[RPM]
Maximum operating speed 80 m/s, flat type EHT (Form 41)
80 EHT 300-4,0 A 24 N SG ALU/25,4
539149
41 A 24 N BF 80
300 x 4,0 x 25,4 (1)
5.100
20
12,800
80 EHT 350-4,0 A 24 N SG ALU/25,4
539156
41 A 24 N BF 80
350 x 4,0 x 25,4 (1)
4.400
10
8,900
206 I
45