HSS Rotary Cutters
PFERD-Cuts and their Applications
HSS rotary cutters are particularly suitable for
Recommendations for use
deburring, chamfering, fettling and work on
■■For applications where high speeds are not
aluminium due to their special tooth geometry
available.
and high production quality. They also provide
■■The toughness of the high-performance
cost-effective benefits on low-performance
high-speed steel (HSS) makes the tooth cut-
machines at low speed ranges.
ting process extremely stable.
Advantages
Recommended RPM
■■Highly-aggressive.
The recommended speeds and cutting speeds
■■Can be used at low speeds.
of cut 5 can be used for HSS cutters with
■■High stock removal in shorter time.
special cut, with the exception of antennae
and light metal cutters. The speeds and cutting
Application examples
speeds specially adapted for these tools are to
■■Deburring.
be found on pages 50-51.
■■Contouring.
■■Milling of acute-angled surfaces.
If only a small part of the rotary cutter head
■■Inner contour work, i.e. peripheral
is used then the recommended speed can be
Safety recommendations
and face milling.
increased accordingly.
= Wear eye protection!
= Wear hearing protection!
Read the instructions!
=
(Please observe the
recommended RPM!)
Suitable for machining soft non-ferrous met-
Suitable for machining steel, cast steel and
Cut ALU
Cut 3
als, brass, copper, aluminium alloys, plastics,
cast iron materials. Also suitable for fine
with chip breaker
fibre-reinforced plastics and rubber.
machining e.g. deburring steel, cast steel
RPM range depends on the rotary cutter
and cast iron materials.
diameter 3.900 to 5.900 RPM.
RPM range depends on the rotary cutter
diameter 1.200 to 7.900 RPM.
Suitable for machining steel, cast steel and
Suitable for fine machining e.g. deburring
Cut 1
Cut 5
stainless steel (INOX).
steel, cast steel and cast iron materials.
without chip breaker
without chip breaker
RPM range depends on the rotary cutter
RPM range depends on the rotary cutter
diameter 1.200 to 6.300 RPM.
diameter 1.600 to 5.300 RPM.
Suitable for machining steel, cast steel and
Cut 2
cast iron materials. Also suitable for fine
with chip breaker
machining e.g. deburring steel, cast steel
and cast iron materials, non-ferrous metals
and plastics.
RPM range depends on the rotary cutter
diameter 1.200 to 13.200 RPM.
202 I
43
HSS Rotary Cutters
HSS Rotary Cutters
Cut Alu
Cut 1
Cut 2
Cut 3
Cut 5
without chip breaker
with chip breaker
with chip breaker
without chip breaker
Recommended rotational speed range
To determine the recommended cutting speed
Select the cut.
Select the required cutter diameter.
[m/min], please proceed as follows:
Establish the cutting speed range.
The cutting speed range and the cutter
Select the material group that is to be
diameter determine the recommended
machined.
To determine the recommended rotational
rotational speed range [RPM].
Determine the type of application.
speed [RPM], please proceed as follows:
Material groups
Application
Cut
Cutting speed
Construction steels,
2
Non-hardened,
Coarse machining =
carbon steels,
60 - 80 m/min
high stock removal
non-heat treated
3
Steel,
tool steels,
steels up to
cast steel
non-alloyed steels,
1200 N/mm²
3
80 - 100 m/min
Fine machining =
case-hardened steels,
(< 38 HRC)
low stock removal
cast steels
5
60 - 80 m/min
Coarse machining =
1
60 - 80 m/min
high stock removal
Rust and
Austenitic and
Stainless steel (INOX)
acid-resistant
1
80 - 100 m/min
ferritic stainless steels
Fine machining =
steels
low stock removal
2
60 - 80 m/min
ALU
Coarse machining =
200 - 300 m/min
Soft non-ferrous
high stock removal
Non-ferrous metals
Alu-alloys, brass, copper, zinc
1
metals
Fine machining =
2
200 - 250 m/min
low stock removal
2
Coarse machining =
Cast iron with flake graphite
60 - 80 m/min
high stock removal
EN-GJL, with nodular graphite
3
Grey cast iron,
Cast iron
cast iron EN-GJS, white an-
white cast iron
nealed cast iron EN-GJMW,
3
Fine machining =
80 - 100 m/min
black cast iron EN-GJMB
low stock removal
5
ALU
Coarse machining =
200 - 300 m/min
high stock removal
1
Plastics and other
Fibre-reinforced thermoplastics,
materials
duroplastics, hard rubber, wood
1
250 - 300 m/min
Fine machining =
low stock removal
2
200 - 250 m/min
Example:
Cutting speed [m/min]
HSS rotary cutter, cut 2
60
80
100
200
250
300
Diameter: 12 mm.
Dia.
Rough chipping of non-hardened,
[mm]
Rotational Speed [RPM]
non-tempered steels.
1,6
12.000
16.000
19.900
39.800
49.800
59.700
Cutting speed: 60 - 80 m/min
2,3
8.400
11.100
13.900
27.700
34.600
41.600
Rotational speed: 1.600 - 2.100 RPM
3,2
6.000
8.000
10.000
19.900
24.900
29.900
4,0
4.800
6.400
8.000
16.000
19.900
23.900
5,0
3.900
5.100
6.400
12.800
16.000
19.100
6,0
3.200
4.300
5.400
10.700
13.300
16.000
7,0
2.800
3.700
4.600
9.100
11.400
13.700
8,0
2.400
3.200
4.000
8.000
10.000
12.000
10,0
2.000
2.600
3.200
6.400
8.000
9.600
12,0
1.600
2.200
2.700
5.400
6.700
8.000
14,0
1.400
1.900
2.300
4.600
5.700
6.900
16,0
1.200
1.600
2.000
4.000
5.000
6.000
44
I
202
HSS Rotary Cutters
HSS Rotary Cutters Shank Dia. 6 mm
Cylindrical shape rotary cutter with end cut.
Cylindrical shape with end cut A ST
Ordering example:
EAN 4007220058596
HSS A 0413ST/6 C3
Please state required cut.
d1
d2
l2
l1
Order No.
Cuts
Shank
Burr dia. x
Overall
dia.
length
length
ALU
1
2
3
5
d2
d1 x l2
l1
[mm]
[mm]
[mm]
EAN 4007220
HSS A 0413ST/6
-
-
-
058596
-
6
4 x 13
60
5
62
HSS A 0616ST/6
-
058602
058619
058626
058633
6
6 x 16
60
5
70
HSS A 0820ST/6
-
-
-
058640
-
6
8 x 20
60
5
82
HSS A 1013ST/6
-
058657
058664
058671
-
6
10 x 13
53
5
85
HSS A 1020ST/6
-
-
-
058695
-
6
10 x 20
60
5
86
HSS A 1225ST/6
-
058701
058718
058725
058732
6
12 x 25
65
5
170
HSS A 1625ST/6
801345
-
058756
058763
-
6
16 x 25
65
5
240
Flame shape rotary cutter.
Ordering example:
Flame shape B
EAN 4007220058787
HSS B 0820/6 C3
r
d1
d2
l2
l1
Order No.
Cut
Shank
Burr dia. x
Overall length
Radius
dia.
length
l1
r
3
d2
d1 x l2
[mm]
[mm]
[mm]
[mm]
EAN 4007220
HSS B 0820/6
058787
6
8 x 20
60
1,5
5
80
HSS B 1230/6
058794
6
12 x 30
70
2,0
5
110
HSS B 1635/6
058800
6
16 x 35
75
2,6
5
180
202 I
45
HSS Rotary Cutters
HSS Rotary Cutters Shank Dia. 6 mm
Cylindrical shape rotary cutter with radius end.
Cylindrical shape with radius end C
Ordering example:
EAN 4007220058817
HSS C 0413/6 C3
Please state required cut.
d1
d2
l2
l1
Order No.
Cuts
Shank
Burr dia. x
Overall
dia.
length
length
ALU
1
2
3
d2
d1 x l2
l1
[mm]
[mm]
[mm]
EAN 4007220
HSS C 0413/6
-
-
-
058817
6
4 x 13
60
5
62
HSS C 0616/6
-
058824
058831
058848
6
6 x 16
60
5
70
HSS C 0820/6
-
-
-
058879
6
8 x 20
60
5
80
HSS C 1020/6
-
-
-
058893
6
10 x 20
60
5
105
HSS C 1225/6
-
058909
058916
058923
6
12 x 25
65
5
160
HSS C 1625/6
058947
-
-
058961
6
16 x 25
65
5
200
Tree-shaped rotary cutter with radius end.
Ordering example:
Tree shape with radius end H
EAN 4007220059319
HSS H 0618/6 C3
r
d1
d2
l2
l1
Order No.
Cut
Shank
Burr dia. x
Overall length
Radius
dia.
length
l1
r
3
d2
d1 x l2
[mm]
[mm]
[mm]
[mm]
EAN 4007220
HSS H 0618/6
059319
6
6 x 18
60
1,5
5
58
HSS H 0820/6
059326
6
8 x 20
60
1,2
5
80
HSS H 1020/6
059333
6
10 x 20
60
2,5
5
82
HSS H 1225/6
059357
6
12 x 25
65
2,5
5
100
HSS H 1630/6
059364
6
16 x 30
70
3,6
5
170
46
I
202
HSS Rotary Cutters
HSS Rotary Cutters Shank Dia. 6 mm
Pointed tree shape rotary cutter.
Pointed tree shape K
Ordering example:
EAN 4007220059371
HSS K 0618/6 C1
Please state required cut.
flattened tip
d1
d2
l2
l1
Order No.
Cuts
Shank
Burr dia. x
Overall
dia.
length
length
ALU
1
2
3
5
d2
d1 x l2
l1
[mm]
[mm]
[mm]
EAN 4007220
HSS K 0618/6
-
059371
059388
059395
059401
6
6 x 18
60
5
65
HSS K 1020/6
-
-
-
059425
-
6
10 x 20
60
5
82
HSS K 1225/6
-
059432
-
059456
-
6
12 x 25
65
5
110
HSS K 1230/6
-
059470
059487
059494
-
6
12 x 30
70
5
130
HSS K 1630/6
059517
-
059524
059531
-
6
16 x 30
70
5
175
Ball-shaped rotary cutter.
Ordering example:
Ball shape F
EAN 4007220058978
HSS F 0403/6 C1
Please state required cut.
d1
d2
l2
l1
Order No.
Cuts
Shank
Burr dia. x
Overall
dia.
length
length
1
2
3
5
d2
d1 x l2
l1
[mm]
[mm]
[mm]
EAN 4007220
HSS F 0403/6
058978
-
058992
-
6
4 x 3
55
5
60
HSS F 0605/6
-
-
059029
-
6
6 x 5
55
5
65
HSS F 0807/6
059043
059050
059067
059074
6
8 x 7
55
5
80
HSS F 1009/6
-
-
059098
-
6
10 x 9
49
5
85
HSS F 1210/6
059111
-
059135
-
6
12 x 10
51
5
90
HSS F 1614/6
059159
059166
059173
-
6
16 x 14
54
5
115
202 I
47
HSS Rotary Cutters
HSS Rotary Cutters Shank Dia. 6 mm
Conical pointed rotary cutter.
Ordering example:
Conical pointed shape G
EAN 4007220059197
HSS G 0618/6 C1
Please state required cut.
flattened tip
α
d1
d2
l2
l1
Order No.
Cuts
Shank
Burr dia. x
Overall
Angle
dia.
length
length
a
1
2
3
5
d2
d1 x l2
l1
[mm]
[mm]
[mm]
EAN 4007220
HSS G 0618/6
059197
-
059210
059227
6
6 x 18
60
14°
5
63
HSS G 1020/6
059234
059241
059258
-
6
10 x 20
60
28°
5
80
HSS G 1225/6
059272
059289
059296
-
6
12 x 25
65
27°
5
100
Conical shape rotary cutter with radius end.
Ordering example:
Conical shape with radius end L
EAN 4007220059579
HSS L 1020/6 C3
Please state required cut.
r
α
d1
d2
l2
l1
Order No.
Cuts
Shank
Burr dia.
Overall
Angle
Radius
dia.
x length
length
a
r
ALU
2
3
d2
d1 x l2
l1
[mm]
[mm]
[mm]
[mm]
EAN 4007220
HSS L 1020/6
-
059562
059579
6
10 x 20
60
14°
2,9
5
72
HSS L 1225/6
-
-
059593
6
12 x 25
65
14°
3,3
5
130
HSS L 1230/6
-
-
059609
6
12 x 30
70
14°
2,6
5
130
HSS L 1630/6
059616
-
059630
6
16 x 30
70
14°
4,8
5
180
48
I
202
HSS Rotary Cutters
HSS Rotary Cutters Shank Dia. 6 mm
Oval shape rotary cutter.
Ordering example:
Oval shape O
EAN 4007220059678
HSS O 0610/6 C3
Please state required cut.
r
d1
d2
l2
l1
Order No.
Cuts
Shank
Burr dia. x
Overall
Radius
dia.
length
length
r
ALU
1
2
3
d2
d1 x l2
l1
[mm]
[mm]
[mm]
[mm]
EAN 4007220
HSS O 0610/6
-
-
-
059678
6
6 x 10
55
2,8
5
65
HSS O 1016/6
-
-
-
059692
6
10 x 16
56
4
5
105
HSS O 1220/6
-
059708
-
059722
6
12 x 20
60
5
5
110
HSS O 1625/6
059746
-
059753
059760
6
16 x 25
65
6,5
5
190
Inverted cone rotary cutter, tapering off to-
Ordering example:
Inverted cone shape W with end cut
wards the shank, with end cut.
EAN 4007220059784
HSS W 1213/6 C3
α
d1
d2
l2
l1
Order No.
Cut
Shank
Burr dia. x
Overall length
Angle
dia.
length
l1
a
3
d2
d1 x l2
[mm]
[mm]
[mm]
EAN 4007220
HSS W 1213ST/6
059784
6
12 x 13
53
20°
5
85
202 I
49
HSS Rotary Cutters
HSS Rotary Cutters, Special Shapes
Rotary cutters in four special shapes with
Ordering example:
Special shapes shank dia. 6 mm
shank dia. 6 mm. Perfectly suited for diverse
EAN 4007220056776
milling work due to different shapes.
HSS 64/6 C3
HSS 45/6
HSS 55/6
HSS 63/6
HSS 64/6
Order No.
Cut
Shank dia.
Burr dia.
Overall
Max.
Min.
Angle
[mm]
x length
length
burr dia.
burr dia.
a
3
[mm]
[mm]
[mm]
[mm]
EAN 4007220
HSS 45/6
056035
6
12 x 18
58
12
-
-
5
95
HSS 55/6
056424
6
6 x 20
60
6
-
-
5
60
HSS 63/6
056738
6
12 x 30
70
12
8
5
130
HSS 64/6
056776
6
12 x 70
70
12
-
-
5
115
Conical cutter in special cut with shank
Recommendation for use:
HSS antenna cutter
dia. 8 mm.
Speed range 200-500 RPM
To be used for smallest burr dia., e.g. sheet
Application:
edge work max. 9.000 RPM.
■■Stepless milling
■■Enlarging bores and holes, e.g. antenna
mounting holes in car bodies
α
d1
d2
l2
l1
Order No.
Cut
Shank
Burr dia. x
Overall
Max.
Min.
Angle
dia.
length
length
burr dia.
burr dia.
a
Special cut
d2
d1 x l2
l1
[mm]
[mm]
EAN 4007220
[mm]
[mm]
[mm]
HSS 104/8
057902
8
20 x 30
60
20
4
31°
1
195
With their three identical cutting areas, these
Application:
HSS edge trimming cutter
HSS edge trimming cutters provides “three-
■■Edge breaking to a defined radius
in-one” versatility and achieve a much longer
Recommendation for use:
service life.
Cutting speed range 60-80 m/min,
r
Speed range 3.100-4.200 RPM.
Cylindrical rotary cutter with triple, concave
d1
d2
For use on smallest burr dia., e.g. sheet edge
l2
contour in special cut with shank dia. 6 mm.
l1
work max. 9.000 RPM.
Order No.
Cut
Shank
Burr dia. x
Overall
Max.
Min.
Radius
dia.
length
length
burr dia.
burr dia.
r
Special cut
d2
d1 x l2
l1
[mm]
[mm]
[mm]
EAN 4007220
[mm]
[mm]
[mm]
HSS 156/6
057964
6
8 x 30
70
8
5,5
5,0
1
92
50
I
202
HSS Rotary Cutters
HSS Rotary Cutters, Special Shapes
Versatile rotary cutters for general use on
Ordering note:
HSS aluminium cutters
aluminium, similar to tree shape.
HSS 120 is delivered with chip breaker.
with female thread
Ordering example:
Available in two different special cuts with
EAN 4007220057919
female thread M10.
HSS 119
HSS 119 M10 special cut
Recommendation for use:
For work on soft non-ferrous metals
HSS 120
Cutting speed range 200-300 m/min
Speed range 3.100-4.700 RPM
For work on aluminium applications up to
max. 9.000 RPM.
Order No.
Cut
Max.
Burr dia.
Overall
Inside
Suitable
burr dia.
x length
length
thread
holder
Special cut
[mm]
[mm]
[mm]
DIN
EAN 4007220
HSS 119 M10
057919
20
53
62
M10
6/10, 8/10
1
390
HSS 120 M10
057926
20
45
54
M10
6/10, 8/10
1
330
Arbors
Suitable for tools with female thread M10.
Arbor
Ordering example:
for tools with female thread
4007220062111
BO 6/10
Order No.
EAN
Shank
Shank
Thread
4007220
dia.
length
(DIN)
[mm]
[mm]
BO 6/10
062111
6
40
M10
1
22
BO 8/10
062128
8
40
M10
1
32
HSS Engraving Cutters Shank Dia. 6 mm
For fine-machining small and hard-to-reach
Ordering example:
HSS engraving cutters
places.
EAN 4007220057971
301/6 special cut
Available in special cut, different head shapes
301/6
and dimensions.
305/6
306/6
307/6
311/6
Order No.
Cut
Shank
Shank
Burr dia.
Angle
dia.
length
x length
a
Special cut
[mm]
[mm]
[mm]
EAN 4007220
301/6
057971
6
40
3,0 x 2,7
-
5
62
305/6
058015
6
40
3,0 x 4,5
-
5
62
306/6
058022
6
40
3,0 x 4,5
34°
5
62
307/6
058039
6
40
3,0 x 4,5
-
5
62
311/6
058077
6
40
6,0 x 5,6
-
5
66
202 I
51
HSS Rotary Cutters
HSS Rotary Cutter Sets
The tools are kept clean, protected, secured
Contents:
Set 81 HSS
and neatly arranged in a non-breakable plastic
10 HSS rotary cutters
box.
1 piece each:
HSS A 0616 ST/6 C3 HSS K 0618/6 C3
HSS A 1013 ST/6 C3 HSS K 1230/6 C3
HSS A 1225/6 C3 HSS K 1630/6 C3
HSS C 0616/6 C3 HSS F 1210/6 C3
HSS C 1225/6 C3 HSS L 1630/6 C3
Order No.
Cut
Shank dia.
[mm]
3
EAN 4007220
81 HSS
060957
6
1
640
The tools are kept clean, protected, secured
Contents:
Set 82 HSS
and neatly arranged in a non-breakable plastic
10 HSS rotary cutters
box.
1 piece each:
HSS A 1013 ST/6 C3 HSS L
1020/6 C3
HSS A 1625 ST/6 C3 HSS L
1630/6 C3
HSS K 1630/6 C3
HSS O 1625/6 C3
HSS F
1614/6 C3
HSS W 1220/6 C3
HSS G 1020/6 C3
HSS
45/6 C3
Order No.
Cut
Shank dia.
[mm]
3
EAN 4007220
82 HSS
060988
6
1
415
The tools are kept clean, protected and neatly
Contents:
Set 83 HSS
arranged in a plastic box with transparent lid.
18 HSS rotary cutters
1 piece each:
HSS A 0616 ST/6 C3 HSS F 1210/6 C3
HSS A 1225/6 C3
HSS F 1614/6 C3
HSS C 0616/6 C3
HSS G 0618/6 C3
HSS C 1225/6 C3
HSS G 1225/6 C3
HSS K 0618/6 C3
HSS O 0610/6 C3
HSS K 1225/6 C3
HSS O 1220/6 C3
HSS K 1230/6 C3
HSS
55/6 C3
HSS F
0403/6 C3
HSS
63/6 C3
HSS
0807/6 C3
HSS
64/6 C3
Order No.
Cut
Shank dia.
[mm]
3
EAN 4007220
83 HSS
060995
6
1
490
52
I
202
HSS Rotary Cutters
HSS Finishing Cutters Shank Dia. 3 mm
906-928
906
908
911
922
923
924
925
926
928
For fine-machining small and hard-to-reach
Available with special cut, in nine different
Ordering example:
places.
head shapes, and a wide range of dimensions,
EAN 4007220058190
3 mm shank dia., shank length 30 mm.
906/3 special cut
Order No.
Cut
Shank dia.
Burr dia.
Overall
Angle
Radius
[mm]
x length
length
a
r
Special cut
[mm]
[mm]
[mm]
EAN 4007220
906/3
058190
3
6,0 x 4,2
34,2
70°
-
5
15
908/3
058213
3
8,0 x 5,5
35,5
70°
-
5
20
911/3
058244
3
1,6 x 2,8
32,8
32°
-
5
15
922/3
058251
3
2,3 x 4,0
34,0
32°
-
5
15
923/3
058268
3
3,2 x 5,6
35,6
32°
-
5
15
924/3
058275
3
4,0 x 7,0
37,0
32°
-
5
15
925/3
058282
3
5,0 x 8,7
38,7
32°
-
5
15
926/3
058299
3
6,0 x 10,5
40,5
32°
-
5
16
928/3
058312
3
8,0 x 14,0
44,0
32°
-
5
22
941-954
941
942
943
944
945
946
947
948
951
952
953
954
Order No.
Cut
Shank dia.
Burr dia.
Overall
Angle
Radius
[mm]
x length
length
a
r
Special cut
[mm]
[mm]
[mm]
EAN 4007220
941/3
058329
3
1,6
31,6
-
-
5
15
942/3
058336
3
2,3
32,3
-
-
5
15
943/3
058343
3
3,2
33,2
-
-
5
15
944/3
058350
3
4,0
34,0
-
-
5
15
945/3
058367
3
5,0
35,0
-
-
5
16
946/3
058374
3
6,0
36,0
-
-
5
18
947/3
058381
3
7,0
37,0
-
-
5
24
948/3
058398
3
8,0
38,0
-
-
5
25
951/3
058404
3
8,0 x 2,0
32,0
-
9,5
5
20
952/3
058411
3
10,0 x 2,5
32,5
-
11,5
5
22
953/3
058428
3
12,0 x 3,0
33,0
-
14
5
24
954/3
058435
3
14,0 x 3,5
33,5
-
15,5
5
28
202 I
53
HSS Rotary Cutters
HSS Finishing Cutters Shank Dia. 3 mm
961-987
961
962
963
964
971
972
973
979
985
986
987
For fine-machining small and hard-to-reach
Ordering note:
Ordering example:
places.
HSS finishing cutters 985 and 987 are supplied
EAN 4007220058442
with chip breakers.
961/3 special cut
Available with special cut, in nine different
head shapes, and a wide range of dimensions,
3 mm shank dia., shank length 30 mm.
Order No.
Cut
Shank dia.
Burr dia.
Overall
Angle
Radius
[mm]
x length
length
a
r
Special cut
[mm]
[mm]
[mm]
EAN 4007220
961/3
058442
3
8,0 x 2,0
32,0
-
1,1
5
20
962/3
058459
3
10,0 x 2,3
32,3
-
1,25
5
25
963/3
058466
3
12,0 x 2,6
32,6
-
1,4
5
30
964/3
058473
3
14,0 x 3,0
33,0
-
1,6
5
35
971/3
058480
3
6,0 x 1,0
31,0
-
-
5
15
972/3
058497
3
8,0 x 1,0
31,0
-
-
5
20
973/3
058503
3
10,0 x 1,0
31,0
-
-
5
20
979/3
058534
3
7,0 x 10,0
40,0
22°
2
5
25
985/3
058565
3
7,0 x 10,0
40,0
-
-
5
28
986/3
058572
3
6,0 x 10,0
40,0
-
-
5
25
987/3
058589
3
7,0 x 12,0
42,0
-
-
5
25
Suitable for fine stock removal on small and
Contents:
Set 84 HSS
hard-to-reach places.
15 HSS finishing cutters
The tools are kept clean, protected and neatly
1 piece each:
arranged in a plastic box with transparent lid.
923
928
943
946
952
924
941
944
947
954
926
942
945
951
973
Order No.
Cut
Shank dia.
[mm]
Special cut
EAN 4007220
84 HSS
061008
3
1
116
54
I
202

Program

PFERD sajam 2016

Pozovite nas:
+381 21 504 272




  •                 
  •     




Tehnoalat d.o.o.
Export - import

Pitagorina 1,
21000 Novi Sad
Republika Srbija

Tel: +381 21 504 272
504 273; 504 274
Fax: +381 21 504 272



© Copyright 2012 Tehnoalat. Design by Massive.